wms_state.h File Reference

Detailed Description

Application library for viewing and controlling stack runtime state

Library services are accessed via lib_state handle.

Definition in file wms_state.h.

Go to the source code of this file.

Typedefs
typedef void(*	app_lib_state_on_beacon_cb_f) (const app_lib_state_beacon_rx_t *beacon)
	Function type for a beacon reception callback. More...
typedef app_res_e(*	app_lib_state_start_stack_f) (void)
	Start the stack. More...
typedef app_res_e(*	app_lib_state_stop_stack_f) (void)
	Stop the stack. More...
typedef uint8_t(*	app_lib_state_get_stack_state_f) (void)
	Get the stack state. More...
typedef app_res_e(*	app_lib_state_get_access_cycle_f) (uint16_t *ac_value_p)
	Get current access cycle. More...
typedef void(*	app_lib_state_on_stack_event_cb_f) (app_lib_stack_event_e event, void *param)
	Function type stack events callback. More...
typedef app_res_e(*	app_lib_state_set_stack_event_cb_f) (app_lib_state_on_stack_event_cb_f cb)
	Register callback for stack events. More...
typedef app_res_e(*	app_lib_state_start_scan_nbors_f) (void)
	Start neighbor scan. More...
typedef app_res_e(*	app_lib_state_get_nbors_f) (app_lib_state_nbor_list_t *nbors_list)
	Get list of neighbors. More...
typedef app_res_e(*	app_lib_state_set_on_beacon_cb_f) (app_lib_state_on_beacon_cb_f cb)
	Set a callback to be called when a beacon is received. More...
typedef app_res_e(*	app_lib_state_get_sink_cost_f) (uint8_t *cost_p)
	Query the currently set additional penalty for the sink usage. More...
typedef app_res_e(*	app_lib_state_set_sink_cost_f) (const uint8_t cost)
	Set additional penalty for the sink usage. More...
typedef app_res_e(*	app_lib_state_get_route_f) (app_lib_state_route_info_t *info)
	Get route information. More...
typedef app_res_e(*	app_lib_state_scan_stop_f) (void)
	Stops an ongoing scan operation before it has ended. More...
typedef app_res_e(*	app_lib_state_get_install_quality_f) (app_lib_state_install_quality_t *qual_out)
	Read installation quality, app_lib_state_install_quality_t. More...
typedef app_lib_settings_net_channel_t(*	app_lib_state_get_cluster_channel_t) (void)
	Query cluster channel (i.e. operating channel) currently in use. More...

Data Structures
struct	app_lib_state_nbor_info_t
	Neighbors info definition. More...
struct	app_lib_state_nbor_list_t
	Neighbors list definition. More...
struct	app_lib_state_beacon_rx_t
	Structure to hold the information about received beacons. More...
struct	app_lib_state_hops_adjust_t
struct	app_lib_state_route_info_t
	Structure for route information. More...
struct	app_lib_state_install_quality_t
	Installation quality information. Contains information about the nodes installation location i.e. its quality indicated by a numeric value, as well as error codes if something is wrong with the location. More...
struct	app_lib_state_on_scan_start_info_t
	Information on started scan. More...
struct	app_lib_state_neighbor_scan_info_t
	Information on neighbor scan. More...
struct	app_lib_state_t
	List of library functions. More...

Enumerations
enum	app_lib_state_nbor_type_e { APP_LIB_STATE_NEIGHBOR_IS_NEXT_HOP = 0, APP_LIB_STATE_NEIGHBOR_IS_MEMBER = 1, APP_LIB_STATE_NEIGHBOR_IS_CLUSTER = 2 }
	Neighbor type. More...
enum	app_lib_state_diradv_support_e { APP_LIB_STATE_DIRADV_SUPPORTED = 0, APP_LIB_STATE_DIRADV_NOT_SUPPORTED = 1, APP_LIB_STATE_DIRADV_UNKNOWN = 2 }
	Support type for directed advertiser, i.e. does neighbor support sending directed advertiser packets to it. More...
enum	app_lib_state_scan_nbors_type_e { APP_LIB_STATE_SCAN_NBORS_ALL = 0, APP_LIB_STATE_SCAN_NBORS_ONLY_REQUESTED = 1 }
	Scan neighbor type to specify the scans that trigger the callback. More...
enum	app_lib_state_stack_state_e {   APP_LIB_STATE_STARTED = 0, APP_LIB_STATE_STOPPED = 1, APP_LIB_STATE_NODE_ADDRESS_NOT_SET = 2, APP_LIB_STATE_NETWORK_ADDRESS_NOT_SET = 4,   APP_LIB_STATE_NETWORK_CHANNEL_NOT_SET = 8, APP_LIB_STATE_ROLE_NOT_SET = 16, APP_LIB_STATE_APP_CONFIG_DATA_NOT_SET = 32, APP_LIB_STATE_ACCESS_DENIED = 128 }
	Stack state flags. More...
enum	app_lib_state_route_state_e { APP_LIB_STATE_ROUTE_STATE_INVALID = 0, APP_LIB_STATE_ROUTE_STATE_PENDING = 1, APP_LIB_STATE_ROUTE_STATE_VALID = 2 }
	Route state. More...
enum	app_lib_state_beacon_type_e { APP_LIB_STATE_BEACON_TYPE_NB = 0, APP_LIB_STATE_BEACON_TYPE_CB = 1 }
	Type for beacons, passed in app_lib_state_beacon_rx_t. More...
enum	install_quality_error_code_e { APP_LIB_STATE_INSTALL_QUALITY_ERROR_NONE = 0x00, APP_LIB_STATE_INSTALL_QUALITY_ERROR_NOROUTE = 0x01, APP_LIB_STATE_INSTALL_QUALITY_ERROR_NONBORS = 0x02, APP_LIB_STATE_INSTALL_QUALITY_ERROR_BADRSSI = 0x04 }
	Error codes for installation quality, if an error code is active, corrective action regarding the installation location is required. More...
enum	app_lib_state_scan_type_e { SCAN_TYPE_APP_ORIGINATED = 0x00, SCAN_TYPE_STACK_ORIGINATED = 0x01 }
	Types of scans. More...
enum	app_lib_stack_event_e {   APP_LIB_STATE_STACK_EVENT_STACK_STOPPED = 0, APP_LIB_STATE_STACK_EVENT_STACK_STARTED = 1, APP_LIB_STATE_STACK_EVENT_SCAN_STARTED = 2, APP_LIB_STATE_STACK_EVENT_SCAN_STOPPED = 3,   APP_LIB_STATE_STACK_EVENT_SCRAT_XFER_STARTED = 4, APP_LIB_STATE_STACK_EVENT_SCRAT_XFER_STOPPED = 5, APP_LIB_STATE_STACK_EVENT_ROUTE_CHANGED = 6 }
	List of event generated by the stack when registering to app_lib_state_set_stack_event_cb_f. More...

Macros
#define	APP_LIB_STATE_NAME   0x02f9c165
	Library symbolic name. More...
#define	APP_LIB_STATE_VERSION   0x20E
	Maximum supported library version. More...
#define	APP_LIB_STATE_INVALID_ROUTE_COST   UINT8_MAX
	Macro for cost indicating "no route". Used in cost component in lib_state->getNbors() service. More...
#define	APP_LIB_STATE_COST_UNKNOWN   0
	Macro for cost being unknown. Used in cost component in lib_state->getNbors() service. More...
#define	APP_LIB_STATE_LINKREL_UNKNOWN   0
	Macro for link reliability being unknown. Used in link reliability component in lib_state->getNbors() service. More...

Typedef Documentation

app_lib_state_get_access_cycle_f

typedef app_res_e(* app_lib_state_get_access_cycle_f) (uint16_t *ac_value_p)

Get current access cycle.

Parameters

ac_value_p

Pointer to store the current access cycle value in milliseconds Updated if return code is APP_RES_OK

Returns

Result code, APP_RES_OK if successful, APP_RES_INVALID_STACK_STATE if stack not running

Definition at line 403 of file wms_state.h.

app_lib_state_get_cluster_channel_t

typedef app_lib_settings_net_channel_t(* app_lib_state_get_cluster_channel_t) (void)

Query cluster channel (i.e. operating channel) currently in use.

Returns

Cluster channel in use

Definition at line 619 of file wms_state.h.

app_lib_state_get_install_quality_f

typedef app_res_e(* app_lib_state_get_install_quality_f) (app_lib_state_install_quality_t *qual_out)

Read installation quality, app_lib_state_install_quality_t.

Parameters

qual_out

[out] The installation quality information is copied to this pointer

Returns

APP_RES_OK if value was read OK

Definition at line 612 of file wms_state.h.

app_lib_state_get_nbors_f

typedef app_res_e(* app_lib_state_get_nbors_f) (app_lib_state_nbor_list_t *nbors_list)

Get list of neighbors.

Parameters

nbors_list

Pointer to store the information of list of neighbors.

Returns

Result code, always APP_RES_OK

This service can be used to tell the status of a node's neighbors. This information may be used for various purposes, for example to estimate where a node is located.

Example:

#define NBOR_LIST_SIZE   6
app_lib_state_nbor_info_t nbors[NBOR_LIST_SIZE];
app_lib_state_nbor_list_t nbors_list =
{
    .number_nbors = NBOR_LIST_SIZE,
    .nbors = &nbors[0]
};
...
lib_state->getNbors(&nbors_list);

Definition at line 527 of file wms_state.h.

app_lib_state_get_route_f

typedef app_res_e(* app_lib_state_get_route_f) (app_lib_state_route_info_t *info)

Get route information.

Parameters

info	[out] Route information is provided here

Returns

Result code, APP_RES_OK if successful

Definition at line 584 of file wms_state.h.

app_lib_state_get_sink_cost_f

typedef app_res_e(* app_lib_state_get_sink_cost_f) (uint8_t *cost_p)

Query the currently set additional penalty for the sink usage.

Parameters

cost_p

Pointer to store the current initial cost

Returns

Result code, APP_RES_OK if successful, APP_RES_INVALID_CONFIGURATION if node is not a sink, APP_RES_INVALID_NULL_POINTER if cost_p is NULL

Example:

uint8_t current_cost;
lib_state->getSinkCost(&current_cost);

Definition at line 552 of file wms_state.h.

app_lib_state_get_stack_state_f

typedef uint8_t(* app_lib_state_get_stack_state_f) (void)

Get the stack state.

Returns

Bit field of stack state, app_lib_state_stack_state_e

Service indicates whether the stack is running or not, and whether it can be started.

Example:

app_lib_state_stack_state_e state;
state = lib_state->getStackState();

Definition at line 393 of file wms_state.h.

app_lib_state_on_beacon_cb_f

typedef void(* app_lib_state_on_beacon_cb_f) (const app_lib_state_beacon_rx_t *beacon)

Function type for a beacon reception callback.

Parameters

beacon

Information about received beacon

Definition at line 330 of file wms_state.h.

app_lib_state_on_stack_event_cb_f

typedef void(* app_lib_state_on_stack_event_cb_f) (app_lib_stack_event_e event, void *param)

Function type stack events callback.

Parameters

event	Which event generated this call
param_p	Parameter pointer associated to the event. This pointer must be casted depending on the event. Its type is listed in app_lib_stack_event_e

Note

Most of the time this callback is generated in critical section of the stack code so execution time must be short

List of event may evolve in future. To write forward compatible code callback must discard unknown event

Example:

static void on_stack_event_cb(app_lib_stack_event_e event, void *param)
{
  app_lib_state_neighbor_scan_info_t * scan_info;
  switch(event)
  {
      case APP_LIB_STATE_STACK_EVENT_STACK_STOPPED:
          // Do something when stack is stopped
          ...
          break;
      case APP_LIB_STATE_STACK_EVENT_SCAN_STOPPED:
          // Do something when scan is stopped
          scan_info = (app_lib_state_neighbor_scan_info_t *) param;
          LOG(LVL_INFO, "Scan stopped: complete=> %d, type=>%d", scan_info->complete, scan_info->scan_type);
          ...
          break;
      default:
          // Nothing to do. New event may be generated in later release
          (void) event;
  }
}
 
...
    lib_state->setOnStackEventCb(on_stack_event_cb);
...

Definition at line 473 of file wms_state.h.

app_lib_state_scan_stop_f

typedef app_res_e(* app_lib_state_scan_stop_f) (void)

Stops an ongoing scan operation before it has ended.

Note

This can only be done on advertisers and LE subnodes (without autorole).

Returns

One of the following values:

• APP_RES_OK
  • scan operation was stopped successfully
• APP_RES_INVALID_CONFIGURATION
  • device is not APP_LIB_SETTINGS_ROLE_ADVERTISER or APP_LIB_SETTINGS_ROLE_SUBNODE_LE
• APP_RES_INVALID_STACK_STATE
  • stack is not running

This service aborts an ongoing scan operation started with lib_state->startScanNbors().

Definition at line 603 of file wms_state.h.

app_lib_state_set_on_beacon_cb_f

typedef app_res_e(* app_lib_state_set_on_beacon_cb_f) (app_lib_state_on_beacon_cb_f cb)

Set a callback to be called when a beacon is received.

Parameters

cb	The function to be executed, or NULL to unset

Returns

Result code, always APP_RES_OK

Definition at line 536 of file wms_state.h.

app_lib_state_set_sink_cost_f

typedef app_res_e(* app_lib_state_set_sink_cost_f) (const uint8_t cost)

Set additional penalty for the sink usage.

This service can be used to inform the sink that the backend communication has problems. In order to keep the entire network operational, other nodes can be forced to use other sinks with working backend communication

Parameters

cost	Value of 0 means that connection is good and no additional penalty is sent to sink usage. Value of 254 includes maximum penalty

Returns

Result code, APP_RES_OK if successful, APP_RES_INVALID_CONFIGURATION if node is not a sink

Example on use:

lib_state->setSinkCost(8);

Definition at line 573 of file wms_state.h.

app_lib_state_set_stack_event_cb_f

typedef app_res_e(* app_lib_state_set_stack_event_cb_f) (app_lib_state_on_stack_event_cb_f cb)

Register callback for stack events.

Parameters

cb	Function to be executed when a stack event listed in app_lib_stack_event_e happens

Definition at line 482 of file wms_state.h.

app_lib_state_start_scan_nbors_f

typedef app_res_e(* app_lib_state_start_scan_nbors_f) (void)

Start neighbor scan.

This service can be used by the application to get fresh information about neighbors. Application can trigger to measurement all neighbors and once the measurement is done, application is informed it over API (see lib_state->setOnScanNborsCb service).

Returns

Result code, always APP_RES_OK unless stack is not running when APP_RES_INVALID_STACK_STATE is returned.

Example:

lib_state->startScanNbors();

Definition at line 501 of file wms_state.h.

app_lib_state_start_stack_f

typedef app_res_e(* app_lib_state_start_stack_f) (void)

Start the stack.

This is most commonly used in the end of the app_init "App_init()" function to start the radio operation.

Example:

void App_init(const app_global_functions_t * functions)
{
    ...
    // Start the stack
    lib_state->startStack();
}

In order to start, the stack needs minimum of four following attributes to be configured: device role, device address, network address and network channel. These attributes can be set by the application thanks to the Single-MCU API during the initialization step. Device role, network address and network channel can be hardcoded in the application image.

Returns

Result code, APP_RES_OK if successful

Definition at line 360 of file wms_state.h.

app_lib_state_stop_stack_f

typedef app_res_e(* app_lib_state_stop_stack_f) (void)

Stop the stack.

Returns

Result code, APP_RES_OK if successful

Note

Stopping the stack will reboot the system. The state callback set with lib_state->setOnStackEventCb() is called just before rebooting with event APP_LIB_STATE_STACK_EVENT_STACK_STOPPED. Node configuration may be done in this callback

This function never returns

Example:

lib_state->stopStack();

Definition at line 378 of file wms_state.h.

---

Data Structure Documentation

app_lib_state_nbor_info_t

struct app_lib_state_nbor_info_t

Neighbors info definition.

Definition at line 101 of file wms_state.h.

Data Fields
uint32_t	address	Address of the neighbor node
app_lib_settings_net_channel_t	channel	Radio channel used by the neighbor
uint8_t	cost	Route cost to the sink via this neighbor. Value of APP_LIB_STATE_INVALID_ROUTE_COST indicates that a neighbor has no route to a sink. Value of APP_LIB_STATE_COST_UNKNOWN states that cost is unknown for this neighbor.
uint8_t	diradv_support	Is directed advertiser supported, app_lib_state_diradv_support_e
uint16_t	last_update	Aount of seconds since these values were last updated.
uint8_t	link_reliability	Link reliability to the neighboring node. Scaled so that 0 = 0 %, 255 = 100 %. Value of APP_LIB_STATE_LINKREL_UNKNOWN tells that link reliability to this neighbor is unknown.
int8_t	norm_rssi	Received signal strength, compensated with transmission power, i.e. this value answers the question "what would the RSSI be, if the neighbor transmits with its maximum TX power". Larger value means better signal. rssi < receiver sensitivity + 10 dB : Insufficient signal level receiver sensitivity + 10 dB <= rssi < receiver_sensitivity + 20 dB : weak signal level rssi >= receiver sensitivity + 20 dB : Good signal level. Note weak signal level is likely to work in environments without interference but the probability for connection problems in networks having some background interference then increases
int8_t	rx_power	Transmission power used when neighbor sending to this device Note Only relevant for type having value of APP_LIB_STATE_NEIGHBOR_IS_NEXT_HOP or APP_LIB_STATE_NEIGHBOR_IS_MEMBER
int8_t	tx_power	Transmission power used when sending to neighbor. Note Only relevant for type having value of APP_LIB_STATE_NEIGHBOR_IS_NEXT_HOP or APP_LIB_STATE_NEIGHBOR_IS_MEMBER
uint8_t	type	Type of the neighbor. app_lib_state_nbor_type_e

app_lib_state_nbor_list_t

struct app_lib_state_nbor_list_t

Neighbors list definition.

Definition at line 150 of file wms_state.h.

Data Fields
app_lib_state_nbor_info_t *	nbors	Information of neighbors received
uint32_t	number_nbors	Input: Maximum amount of neighbors in nbors field. Output: Amount of neighbors filled

app_lib_state_beacon_rx_t

struct app_lib_state_beacon_rx_t

Structure to hold the information about received beacons.

Definition at line 198 of file wms_state.h.

Data Fields
app_addr_t	address	Address of the beacon sender.
uint8_t	cost	Cost of the device. 255==no route.
bool	is_da_support	Sender supports Directed Advertiser sending packets to it.
bool	is_ll	Device is LL.
bool	is_sink	Device is sink.
int8_t	rssi	RSSI in dBm. Larger value means better signal. rssi < receiver sensitivity + 10 dB : Insufficient signal level receiver sensitivity + 10 dB <= rssi < receiver_sensitivity + 20 dB : weak signal level rssi >= receiver sensitivity + 20 dB : Good signal level Note weak signal level is likely to work in environments without interference but the probability for connection problems in networks having some background interference then increases
int8_t	txpower	Tx power in dB This equals maximum transmission power that sender can transmit (which is used when transmitting beacons)
uint8_t	type	Type of beacon app_lib_state_beacon_type_e.

app_lib_state_hops_adjust_t

struct app_lib_state_hops_adjust_t

Note

This struct is deprecated in Wirepas Mesh version 5.2.0 and later.

Definition at line 232 of file wms_state.h.

Data Fields
app_addr_t	address
uint8_t	hops_left

app_lib_state_route_info_t

struct app_lib_state_route_info_t

Structure for route information.

Definition at line 241 of file wms_state.h.

Data Fields
app_lib_settings_net_channel_t	channel	Next hop's (logical) data (cluster) channel or 0 if no valid route
uint8_t	cost	Route cost or APP_LIB_STATE_INVALID_ROUTE_COST if no valid route
app_addr_t	next_hop	Next hop's unicast address or 0 if no valid route
app_addr_t	sink	Sink's unicast address or 0 if no valid route
app_lib_state_route_state_e	state	Route state: invalid, pending or valid

app_lib_state_install_quality_t

struct app_lib_state_install_quality_t

Installation quality information. Contains information about the nodes installation location i.e. its quality indicated by a numeric value, as well as error codes if something is wrong with the location.

For more detailed information about the value(s) presented here, see application note about installation quality API, document reference: https://developer.wirepas.com/support/solutions/articles/77000498319-radio-installation-quality-api-application-note

Definition at line 281 of file wms_state.h.

Data Fields
uint8_t	error_codes	Error codes, install_quality_error_code_e
uint8_t	quality	Quality reported as u8. Limits are as follows: Quality >= 127 : Good installation 127 > Quality > 63 : Average installation Quality <= 63 : Bad installation

app_lib_state_on_scan_start_info_t

struct app_lib_state_on_scan_start_info_t

Information on started scan.

Definition at line 307 of file wms_state.h.

Data Fields
uint8_t	scan_type

app_lib_state_neighbor_scan_info_t

struct app_lib_state_neighbor_scan_info_t

Information on neighbor scan.

Definition at line 316 of file wms_state.h.

Data Fields
bool	complete
app_lib_state_scan_type_e	scan_type

app_lib_state_t

struct app_lib_state_t

List of library functions.

Definition at line 624 of file wms_state.h.

Data Fields
app_lib_state_get_access_cycle_f	getAccessCycle
app_lib_state_get_cluster_channel_t	getClusterChannel
app_lib_state_get_install_quality_f	getInstallQual
app_lib_state_get_nbors_f	getNbors
app_lib_state_get_route_f	getRouteInfo
app_lib_state_get_sink_cost_f	getSinkCost
app_lib_state_get_stack_state_f	getStackState
app_lib_state_set_on_beacon_cb_f	setOnBeaconCb
app_lib_state_set_stack_event_cb_f	setOnStackEventCb
app_lib_state_set_sink_cost_f	setSinkCost
app_lib_state_start_scan_nbors_f	startScanNbors
app_lib_state_start_stack_f	startStack
app_lib_state_scan_stop_f	stopScanNbors
app_lib_state_stop_stack_f	stopStack

Enumeration Type Documentation

app_lib_stack_event_e

enum app_lib_stack_event_e

List of event generated by the stack when registering to app_lib_state_set_stack_event_cb_f.

Note

Each event specifies the additionnal parameter associated to the event if it exists

Enumerator
APP_LIB_STATE_STACK_EVENT_STACK_STOPPED	Stack has stopped. Param = NULL
APP_LIB_STATE_STACK_EVENT_STACK_STARTED	Stack has started. Param = NULL
APP_LIB_STATE_STACK_EVENT_SCAN_STARTED	A scan has started. Param = pointer to app_lib_state_on_scan_start_info_t
APP_LIB_STATE_STACK_EVENT_SCAN_STOPPED	A scan has stoppedd. Param = pointer to app_lib_state_neighbor_scan_info_t
APP_LIB_STATE_STACK_EVENT_SCRAT_XFER_STARTED	A scratchpad transfer (TX or RX) has started. It will prevent app from being scheduled for up to 30s. Param = NULL
APP_LIB_STATE_STACK_EVENT_SCRAT_XFER_STOPPED	Scratchpad transfer is finished and app will be scheduled normaly. Param = NULL
APP_LIB_STATE_STACK_EVENT_ROUTE_CHANGED	Route has changed. Param = pointer to app_lib_state_route_info_t

Definition at line 410 of file wms_state.h.

{
    APP_LIB_STATE_STACK_EVENT_STACK_STOPPED = 0,
    APP_LIB_STATE_STACK_EVENT_STACK_STARTED = 1,
    APP_LIB_STATE_STACK_EVENT_SCAN_STARTED = 2,
    APP_LIB_STATE_STACK_EVENT_SCAN_STOPPED = 3,
    APP_LIB_STATE_STACK_EVENT_SCRAT_XFER_STARTED = 4,
    APP_LIB_STATE_STACK_EVENT_SCRAT_XFER_STOPPED = 5,
    APP_LIB_STATE_STACK_EVENT_ROUTE_CHANGED = 6,
} app_lib_stack_event_e;

app_lib_state_beacon_type_e

enum app_lib_state_beacon_type_e

Type for beacons, passed in app_lib_state_beacon_rx_t.

Enumerator
APP_LIB_STATE_BEACON_TYPE_NB	Network beacon.
APP_LIB_STATE_BEACON_TYPE_CB	Cluster beacon.

Definition at line 189 of file wms_state.h.

{
    APP_LIB_STATE_BEACON_TYPE_NB = 0,   
    APP_LIB_STATE_BEACON_TYPE_CB = 1,   
} app_lib_state_beacon_type_e;

app_lib_state_diradv_support_e

enum app_lib_state_diradv_support_e

Support type for directed advertiser, i.e. does neighbor support sending directed advertiser packets to it.

Enumerator
APP_LIB_STATE_DIRADV_SUPPORTED	Directed advertiser is supported by neighbor and packet can be sent to it
APP_LIB_STATE_DIRADV_NOT_SUPPORTED	Sending not supported by neighbor
APP_LIB_STATE_DIRADV_UNKNOWN	Unknown state. Directed advertiser maybe or maybe not supported by neighbor but packet can not be sent to it

Definition at line 74 of file wms_state.h.

{
    APP_LIB_STATE_DIRADV_SUPPORTED      = 0,
    APP_LIB_STATE_DIRADV_NOT_SUPPORTED  = 1,
    APP_LIB_STATE_DIRADV_UNKNOWN        = 2,
} app_lib_state_diradv_support_e;

app_lib_state_nbor_type_e

enum app_lib_state_nbor_type_e

Neighbor type.

Note

Most reliable information is always from next hop and members Other entries might be very old

Enumerator
APP_LIB_STATE_NEIGHBOR_IS_NEXT_HOP	Neighbor is specifically a next hop cluster, i.e. used as a route to sink
APP_LIB_STATE_NEIGHBOR_IS_MEMBER	Neighbor is specifically a member of this node
APP_LIB_STATE_NEIGHBOR_IS_CLUSTER	Neighbor is heard from network scan

Definition at line 59 of file wms_state.h.

{
    APP_LIB_STATE_NEIGHBOR_IS_NEXT_HOP  = 0,
    APP_LIB_STATE_NEIGHBOR_IS_MEMBER    = 1,
    APP_LIB_STATE_NEIGHBOR_IS_CLUSTER   = 2,
} app_lib_state_nbor_type_e;

app_lib_state_route_state_e

enum app_lib_state_route_state_e

Route state.

Enumerator
APP_LIB_STATE_ROUTE_STATE_INVALID	No next hop / route.
APP_LIB_STATE_ROUTE_STATE_PENDING	Acquiring next hop / route.
APP_LIB_STATE_ROUTE_STATE_VALID	Valid next hop / route.

Definition at line 179 of file wms_state.h.

{
    APP_LIB_STATE_ROUTE_STATE_INVALID = 0,      
    APP_LIB_STATE_ROUTE_STATE_PENDING = 1,      
    APP_LIB_STATE_ROUTE_STATE_VALID = 2         
} app_lib_state_route_state_e;

app_lib_state_scan_nbors_type_e

enum app_lib_state_scan_nbors_type_e

Scan neighbor type to specify the scans that trigger the callback.

Enumerator
APP_LIB_STATE_SCAN_NBORS_ALL	All scans will trigger the registered callback
APP_LIB_STATE_SCAN_NBORS_ONLY_REQUESTED	Only explicitly requested scans from app will trigger the registered callback

Definition at line 89 of file wms_state.h.

{
    APP_LIB_STATE_SCAN_NBORS_ALL = 0,
    APP_LIB_STATE_SCAN_NBORS_ONLY_REQUESTED = 1,
} app_lib_state_scan_nbors_type_e;

app_lib_state_scan_type_e

enum app_lib_state_scan_type_e

Types of scans.

Enumerator
SCAN_TYPE_APP_ORIGINATED
SCAN_TYPE_STACK_ORIGINATED

Definition at line 295 of file wms_state.h.

{
    // Scan originated by application (by using call @ref
    // app_lib_state_start_scan_nbors_f "lib_state->startScanNbors()")
    SCAN_TYPE_APP_ORIGINATED = 0x00,
    // Scan originated by stack
    SCAN_TYPE_STACK_ORIGINATED = 0x01,
} app_lib_state_scan_type_e;

app_lib_state_stack_state_e

enum app_lib_state_stack_state_e

Stack state flags.

Enumerator
APP_LIB_STATE_STARTED	Stack is started.
APP_LIB_STATE_STOPPED	Stack is stopped.
APP_LIB_STATE_NODE_ADDRESS_NOT_SET	Node address is not set.
APP_LIB_STATE_NETWORK_ADDRESS_NOT_SET	Network address is not set.
APP_LIB_STATE_NETWORK_CHANNEL_NOT_SET	Network channel is not set.
APP_LIB_STATE_ROLE_NOT_SET	Node role is not set.
APP_LIB_STATE_APP_CONFIG_DATA_NOT_SET	App config data is not set (sink only)
APP_LIB_STATE_ACCESS_DENIED	Operation is not allowed.

Definition at line 163 of file wms_state.h.

{
    APP_LIB_STATE_STARTED = 0,                  
    APP_LIB_STATE_STOPPED = 1,                  
    APP_LIB_STATE_NODE_ADDRESS_NOT_SET = 2,     
    APP_LIB_STATE_NETWORK_ADDRESS_NOT_SET = 4,  
    APP_LIB_STATE_NETWORK_CHANNEL_NOT_SET = 8,  
    APP_LIB_STATE_ROLE_NOT_SET = 16,            
    APP_LIB_STATE_APP_CONFIG_DATA_NOT_SET = 32, 
    APP_LIB_STATE_ACCESS_DENIED = 128           
} app_lib_state_stack_state_e;

install_quality_error_code_e

enum install_quality_error_code_e

Error codes for installation quality, if an error code is active, corrective action regarding the installation location is required.

Enumerator
APP_LIB_STATE_INSTALL_QUALITY_ERROR_NONE	No installation quality errors detected
APP_LIB_STATE_INSTALL_QUALITY_ERROR_NOROUTE	Error: Node has no route to sink
APP_LIB_STATE_INSTALL_QUALITY_ERROR_NONBORS	Error: Node does not have enough good quality neighbors
APP_LIB_STATE_INSTALL_QUALITY_ERROR_BADRSSI	Error: Node has bad RSSI to next hop neighbor

Definition at line 259 of file wms_state.h.

{
    APP_LIB_STATE_INSTALL_QUALITY_ERROR_NONE    = 0x00,
    APP_LIB_STATE_INSTALL_QUALITY_ERROR_NOROUTE = 0x01,
    APP_LIB_STATE_INSTALL_QUALITY_ERROR_NONBORS = 0x02,
    APP_LIB_STATE_INSTALL_QUALITY_ERROR_BADRSSI = 0x04,
} install_quality_error_code_e;

Macro Definition Documentation

APP_LIB_STATE_COST_UNKNOWN

#define APP_LIB_STATE_COST_UNKNOWN   0

Macro for cost being unknown. Used in cost component in lib_state->getNbors() service.

Definition at line 44 of file wms_state.h.

APP_LIB_STATE_INVALID_ROUTE_COST

#define APP_LIB_STATE_INVALID_ROUTE_COST   UINT8_MAX

Macro for cost indicating "no route". Used in cost component in lib_state->getNbors() service.

Definition at line 37 of file wms_state.h.

APP_LIB_STATE_LINKREL_UNKNOWN

#define APP_LIB_STATE_LINKREL_UNKNOWN   0

Macro for link reliability being unknown. Used in link reliability component in lib_state->getNbors() service.

Definition at line 51 of file wms_state.h.

APP_LIB_STATE_NAME

#define APP_LIB_STATE_NAME   0x02f9c165

Library symbolic name.

"STATE"

Definition at line 27 of file wms_state.h.

APP_LIB_STATE_VERSION

#define APP_LIB_STATE_VERSION   0x20E

Maximum supported library version.

Definition at line 30 of file wms_state.h.